- - Extend HDMI to up to four displays at up to 300ft at a 1080p resolution
- - Utilizes a single Cat5e, Cat6 or Cat6a cable for extension
- - HDBaseT technology supports EDID pass through
- - TruChoice Power allows for power at transmitter or receiver end
4-Port HDMI over Cat5 Box Transmitter, 4 x HDMI In, 3 x RJ-45 (F), 300ft Max, 1920 x 1200 Max, Aluminum
The 4-Port HDMI over Cat5 Box Transmitter, when used in conjunction with receivers (not included), allows an HDMI signal to be extended over a Cat5/Cat5e/Cat6 cable to up to four connected monitors and up to sixteen monitors by daisy-chaining receivers. This system can extend a signal up to 300ft without signal degradation at 1920x1200 or 1920x1080 resolutions. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. The receivers come in either wall plate or boxes and are interoperable, providing a choice in the form factors that are best suited for the application. In addition, this solution utilizes TruChoice™ power, providing power at either the transmitter or at each receiver. HDBaseT technology allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display?s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-In power surge/ESD/EFT protection and high ground loop immunity ensure high performance signal extension.
C2G TruLink, 1920 x 1200 pixels, AV transmitter, 91.4 m, Aluminium
C2G TruLink. Type: AV transmitter, Maximum resolution: 1920 x 1200 pixels, Cable types supported: Cat5, Cat5e, Cat6. Operating voltage: 18 V, Current: 1 A, Power requirements: 100 - 240V. Weight: 1.98 kg, Transmitter depth: 13.3 cm, Transmitter height: 4.45 cm
