Samsung Spinpoint P 40GB HDD 3.5" Serial ATA II

Brand : Samsung
Product family : Spinpoint P
Product name : 40GB HDD
Product code : HD040GJ
Category : Internal Hard Drives
Data-sheet quality : created/standardized by Icecat
Product views : 99714
Info modified on : 03 Jan 2019 17:46:03
Warranty: : 3 years
Long product name Samsung Spinpoint P 40GB HDD 3.5" Serial ATA II :
40GB Serial ATA II, 7200RPM HDD
Samsung Spinpoint P 40GB HDD 3.5" Serial ATA II :
Capture the best Quality in the World Market
Digitall mobility with the most reliable 3.5" mobile hard disk drive.

Key features:
- Native Serial ATA II (3.0Gbps) with Native Command Queuing (NCQ).
- Fluid Dynamic Bearing Spindle Motor Technology.
- High Speed Dual Digital Signal Processor (DSP) Based Architecture.
- ATA SMART Compliant.
- ATA Security Mode Feature Set.
- ATA Host Protected Area Feature Set.
- ATA Automatic Acoustic Management Feature Set.
- ATA 48-bit Address Feature Set.
- ATA Streaming Feature Set.
- ATA Power Up In Standby Feature Set.
- ATA Device Configuration Overlay Feature Set.
- Permuted RLL/ECC On-The-Fly Error Correction.
- RoHS-compliant.
- NoiseGuard™.
- SilentSeek™.
- Hot-Plug & Hot-Swap capable.
Short summary description Samsung Spinpoint P 40GB HDD 3.5" Serial ATA II :
Samsung Spinpoint P 40GB HDD, 3.5", 40 GB, 7200 RPM
Long summary description Samsung Spinpoint P 40GB HDD 3.5" Serial ATA II :
Samsung Spinpoint P 40GB HDD. HDD size: 3.5", HDD capacity: 40 GB, HDD speed: 7200 RPM

More>>> <<<Less

Embed the product datasheet into your content

XML product data for SamsungHD040GJ

JSON product data for Samsung HD040GJ

JSON DOC

CSV product data for Samsung HD040GJ

Report mistake

Specs

Features
HDD size	3.5"
HDD capacity	40 GB
HDD speed	7200 RPM
Interface	Serial ATA II
Type	HDD
Storage drive buffer size	8 MB
Full stroke seek time	18 ms
Track to track seek time	0.8 ms
Average seek time	8.9 ms
Average latency	4.17 ms
Bytes per sector	512
Mean time between failures (MTBF)	500000 h

Power
Power consumption (typical)	7.8 W
Power consumption (standby)	0.7 W
Power consumption (PowerSave)	0.7 W
Power consumption (read)	8 W
Power consumption (write)	8 W
Power consumption (idle)	6.8 W

Power
Operating voltage	5 / 12 V

Operational conditions
Operating temperature (T-T)	0 - 60 °C
Storage temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 90%
Storage relative humidity (H-H)	5 - 95%
Operating vibration	1.5 G
Non-operating vibration	8 G
Operating altitude	-304.8 - 3048 m
Non-operating altitude	-304.8 - 12192 m
Operating shock	63 G
Non-operating shock	350 G

Other features
Special features	RoHS NoiseGuard SilentSeek